Mix
and match diagonal & horizontal braces to customize your brace based on your
individual needs. Use 7 or 8
foot T-posts for all of your corner and end posts so they get into the ground
2-3' like you would put a wooden post. We recommend using a diagonal brace coming off of any horizontal brace for
strength & stability. Bracing Photos
NOTE
If you have a corner that is not square, and is running on a different
angle, simply install two separate single diagonal braces in the direction of your
fence line and wire the posts together.
YOU'LL NEVER HAVE TO DIG
ANOTHER POST HOLE, POUR CONCRETE OR SET EXPENSIVE, HEAVY WOODEN POSTS!
ERECT A CORNER IN APPROXIMATELY 15 MINUTES OR LESS! Now you can
quickly and economically erect a corner with the bracing needed for tight
stretched wire fencing using regular steel fence posts, commonly know as "T-posts".
Wedge-LocTM hardware fits all steel U.S., Canadian & Mexican T-posts and
works with ALL types of fence material for both permanent and temporary
fencing needs. The Wedge-LocTM collar will hold up to 4 sockets to let you build
2, 3 or 4 way corners. Start and finish a fence line or barricade fence
anywhere! Build a fence for rotational grazing, temporary pastures, snow fence,
trellising for fruit...virtually any kind of fence you want that needs to be
braced.
BUILD A CORNER IN NO TIME!!!
WEDGE-LOCTM HARDWARE WAS
STILL INTACT AND DOING IT'S JOB following
tests performed at the University of Arizona
that proved the durability of
Wedge-LocTM hardware. Test wires broke at 2900 lbs. of pull and the testing was
stopped. (The average combined pull on a 4-strand 12.5 ga. wire fence is 500 -
700 lbs.)
Mix
and match diagonal & horizontal braces to customize your brace based on your
individual needs. Use 7 or 8
foot T-posts for all of your corner and end posts so they get into the ground
2-3' like you would put a wooden post. We recommend using a diagonal brace coming off of any horizontal brace for
strength & stability. 
